If you are wondering how to fix orange peel on a new paint job, you’re in luck. There are a couple of less invasive ways to correct this unsightly condition. In this article, we’ll discuss Wet sanding, Preparation, and Increasing air into the paint. Hopefully, these solutions will make your new paint job look better than ever. But first, let’s discuss what causes orange peel and how to remedy it.
Wet sanding
If your new paint job has orange peel, wet sanding is the way to go. The best sandpaper to use is one with a medium cut, which will address the problem without being too aggressive. You can progress to a coarser cut if necessary. For curved surfaces, use a flexible backing pad, soft foam block, or even your hand. The key is to apply light pressure while sanding so that you do not scratch the surface.
Preparation
If you’ve just finished a new paint job, you’ve probably noticed some orange peel, or at least light texture. In order to fix orange peel, you need to wet sand the paint job thoroughly. Using a 400-grit sandpaper for wood, or 800 to 1,000-grit for metal, you’ll smooth out any rough spots and restore the gloss. You should avoid waxing for at least 30 days after the paint job is done.
Sanding
If you’ve just finished a paint job and you’re having trouble fixing the orange peel that appears on the surface, you can use a sanding block with a wet sanding compound to remove the imperfections. The sanding block should be wrapped in 1,000 to 2,000 grit sandpaper and dipped into water. Gently sand the orange peel away, using light pressure. Don’t over-sand and don’t scrub the area too hard. If the peeling is still there, you can polish the surface using regular car polish.
Increasing air into the paint
There are several different ways to correct orange peel, and the most effective one involves improving the atomization of the paint. To make the paint droplets smaller, the paint must be thinned. This process will produce a smoother finish. To increase atomization, you can increase the air content in the paint. You should use a paint thinner, but be careful not to strain it out, as this can result in air bubbles. In addition, avoid storing the paint in conditions that will cause it to crack. Moreover, always allow the paint to dry before applying additional coats.
Sanding a panel at a time
There are many things you can do to repair the appearance of orange peel on a new paint job. First, the paint will need to be sanded down to remove the orange peel. This is a common problem, particularly on fast-drying paints. A quick sanding with 1200-grit sand paper can sometimes fix the problem. If you cannot remove the peel, then you can try respraying. Ensure the paint has been thinned according to its label instructions and avoid over-coating the surface.
Common defects in car refinishing
A common defect in car refinishing is orange peel. This unattractive texture is present in all paint jobs, except for those that have been polished and cut. Even the best refinishing shops cannot prevent orange peel. To avoid it, refinish the car’s paint with the proper application technique. Here are the ways to repair orange peel. If you’ve recently purchased a car with orange peel, be sure to contact a reputable shop for a refinishing.